Cleaning the Lens
79
Clean the projector's lens periodically, or whenever you notice dust or
smudges on the surface.
• To remove dust or smudges, gently wipe the lens with clean and dry lens-
cleaning paper.
• If the lens is dusty, blow off dust using a blower, and then wipe the lens.
Warning
• Before cleaning the lens, turn off the projector and unplug the power cord.
• Do not use any flammable gas sprays such as air dusters to blow off dust. The
high heat generated by the projector may cause a fire.
Attention
• Do not wipe the lens right after you turn off the projector. Doing so could
damage the lens.
• Do not use any harsh materials to clean the lens and do not subject the lens to
any impacts; otherwise, it could be damaged.
To Next Page
Loading...
