Turning On the Projector
26
Turn on the computer or video device you want to use after you turn on the
projector.
a
Remove the lens cover.
b
Connect the power cord to the projector's power inlet and plug it into
an electrical outlet.
The projector's power indicator turns blue. This indicates that the
projector is receiving power, but is not yet turned on (it is in standby
mode).
c
Press the power button on the projector or remote control to turn on
the projector.
The status indicator flashes blue as the projector warms up. Once the
projector is warmed up, the status indicator stops flashing and turns
blue.
To Next Page
Loading...
