Configuration Menu
90
Function Menu/Settings Explanation
HDMI Link
Device Connections - Displays a list of devices connected to
the HDMI1 or HDMI2 ports, or to Wire-
lessHD
*3
.
HDMI Link On, Off Enables or disables the HDMI Link
function.
Audio Out Device Projector, AV System,
WiHD Transmitter (Opti-
cal)
*3
, WiHD Transmitter
(HDMI)
*3
Selects which device outputs audio.
s p.70
Power On Link Off, Bidirectional, Device -
> PJ, PJ -> Device
Sets the link function when the power
is turned on.
•
When linking operations to the con-
nected device and turning on the
projector, select Bidirectional or
Device -> PJ.
•
When linking power on for the pro-
jector to the connected device, se-
lect Bidirectional or PJ -> Device.
Power Off Link On, Off Sets whether or not to power off con-
nected devices when the projector is
turned off.
Link Buffer On, Off If HDMI Link is not working correctly,
you may be able to improve it by
changing the settings.
WirelessHD
*3
Connected Device - Displays the available WirelessHD de-
vice that can be connected.
WirelessHD On, Off Enables or disables the WirelessHD
function.
Video Reception
Indicates the connection status with
the WirelessHD Transmitter. While
connected, Transmitter detected is
displayed.
Reset Yes, No
Resets WirelessHD settings to their
default settings.
Note that even if you reset the pro-
jector, the WirelessHD Transmitter
settings are not reset. To reset the
WirelessHD Transmitter, press the
Setup button on the base for 5 sec-
onds or more.
s p.57
Downloaded from www.vandenborre.be
To Next Page
Loading...
Need help?
General
