Configuration Menu
91
Function Menu/Settings Explanation
Bluetooth
Search Bluetooth
Device
- Searches for available Bluetooth de-
vices and displays them as a list.
Bluetooth Audio On, Off Enables or disables audio output from
Bluetooth audio devices.
Setup cannot be performed in the fol-
lowing cases.
•
When the source is LAN or USB
•
When Audio Out Device from the
HDMI Link menu is set to AV Sys‐
tem, WiHD Transmitter (Optical),
or WiHD Transmitter (HDMI)
Lock Setting
Child Lock On, Off
This locks the
button on the pro-
jector's control panel to prevent chil-
dren from turning on the projector by
accident. You can turn on the power
when locked by holding down the
button for approximately three
seconds. You can still turn off the de-
vice using the
button, or perform
operations with the remote control as
usual.
If changed, this setting is enabled af-
ter you power off the projector and
the cool-down process is complete.
Note that even if Child Lock is set to
On, the projector still turns on when
the power cord is connected if Direct
Power On is set to On.
Control Panel Lock Full Lock, Partial Lock, Off
Full Lock: Disables all of the projec-
tor's buttons.
Partial Lock: Disables all of the pro-
jector's buttons except for the
button.
is displayed on the screen if but-
tons are pressed while the projector
is locked. To unlock, press and hold
the
button on the control panel
for at least 7 seconds.
If changed, this setting is enabled
once you close the Configuration
menu.
User Button
Fine/Fast, 3D Display, 2D-to-3D Conversion,
Brightness Control, Info, Display the QR Code
Select a Configuration menu item to
assign to the
button on the re-
mote control. By pressing the
button, the assigned menu item se-
lection/adjustment screen is dis-
played, allowing you to make one-
touch settings/adjustments.
Downloaded from www.vandenborre.be