EasyManuals Logo

Epson EH-TW9300W User Manual

Epson EH-TW9300W
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #102 background imageLoading...
Page #102 background image
Troubleshooting
101
The device name is not displayed under Device Connections
Check Remedy
Does the connected device meet the HDMI
CEC standards?
If the connected device does not meet the HDMI CEC standards,
it is not displayed. See the documentation and so on supplied
with the connected device for more information.
Problems with WirelessHD (EH-TW9300W/EH-TW8300W only)
Cannot project WirelessHD images
Check Remedy
Does the cable connecting the supplied Wire-
lessHD Transmitter meet the HDMI stand-
ards?
If the cable does not meet the HDMI standards, operations are
not possible.
Is WirelessHD set to Off? When WirelessHD is set to Off from the Configuration menu,
projection is not possible for WirelessHD input signals. Set Wire‐
lessHD to On, and then press the
button. s Settings -
WirelessHD - WirelessHD p.80
Are signals being received within the Wire-
lessHD transmission range?
Check the range within which the WirelessHD's transceiver can
communicate, and view within that range.
s p.59
Is the supplied WirelessHD Transmitter
turned on?
Check the power lamp on the WirelessHD Transmitter. If there is
no power being supplied, make sure the connector for the AC
adapter is securely connected, and then turn on the power
switch.
Is the WirelessHD indicator for the supplied
WirelessHD Transmitter off?
The WirelessHD cannot communicate with the projector. Check
the range within which the WirelessHD's transceiver can com-
municate, and setup within that range.
Is the Link indicator for the supplied Wire-
lessHD Transmitter off?
No signal is output from the AV device connected to the Wire-
les sHD Tra nsm itt er. Che ck t hat the c abl es fro m th e AV d evi ce and
the WirelessHD Transmitter are securely connected.
Are the projector and the WirelessHD Trans-
mitter facing the correct way?
Setup the projector and the WirelessHD Transmitter so that they
are facing each other.
Interference, distortion, or interruption appear in WirelessHD
Check Remedy
Are signals being received within the Wire-
lessHD transmission range?
Check the range within which the WirelessHD's transceiver can
communicate, and view within that range.
s p.59
Are there any obstructions between the Wire-
lessHD Transmitter and the projector?
Because WirelessHD communicates using a tight beamed elec-
tromagnetic wave, if there are any people or objects and so on
obstructing the communication path, this could have an adverse
affect on the image. Make sure that there are no obstacles be-
tween the WirelessHD Transmitter and the projector within the
WirelessHD transmission range.
s p.59

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EH-TW9300W and is the answer not in the manual?

Epson EH-TW9300W Specifications

General IconGeneral
Matrix size0.74 \
Number of colors1.073 billion colors
Native aspect ratio16:9
Projection distance3 - 6.3 m
Projection technology3LCD
Contrast ratio (typical)1000000:1
Screen size compatibility50 - 300 \
Projector native resolution1080p (1920x1080)
Keystone correction, horizontal± 30 °
Zoom capabilityYes
Focal length range22.5 - 46.7 mm
Aperture range (F-F)2 - 3
Horizontal lens shift range-96.3 - 96.3 %
Lamp typeUHE
Lamp power250 W
Lamps quantity1 lamp(s)
Light source typeLamp
Service life of light source3500 h
Service life of light source (economic mode)5000 h
Color modes (2D)Bright cinema, Cinema, Dynamic, Natural
Color modes (3D)Cinema, Dynamic
Supported 3D formatsSide by side, Top and bottom
Analog signal format system-
Supported graphics resolutions640 x 480 (VGA), 720 x 480, 720 x 576, 800 x 600 (SVGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1280 x 800 (WXGA), 1366 x 768, 1600 x 900, 1920 x 1080 (HD 1080)
DVI portNo
Composite video in0
HDMI ports quantity4
Serial interface typeRS-232C
USB 2.0 ports quantity2
Ethernet LAN data rates10, 100, 1000 Mbit/s
Noise level24 dB
Country of originChina
2D/3D frequency image240/480 Hz
Noise level (economic mode)20 dB
Cables includedAC
Bundled softwareEasyMP Multi PC Projection
Operating altitude0 - 3000 m
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)5 - 35 °C
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.35 W
Power consumption (typical)355 W
Power consumption (economy mode)271 W
PlacementDesktop
Product typeStandard throw projector
Product colorWhite
Market positioningHome cinema
Cable lock slot typeKensington
Pallet width800 mm
Pallet height150 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pack1 pc(s)
Quantity per pallet16 pc(s)
Quantity per pallet layer2 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth450 mm
Width520 mm
Height170 mm
Weight11200 g
Package depth660 mm
Package width513 mm
Package height260 mm
Package weight15710 g

Related product manuals