EasyManuals Logo

Epson EH-TW9300W User Manual

Epson EH-TW9300W
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
Useful Functions
43
Enjoying 3D Images
Preparing to View 3D Images
Check the following before viewing 3D images.
When the source is HDMI1, HDMI2, or WirelessHD (EH-TW9300W/EH-TW8300W only).
Set 3D Display to Auto or 3D.
When this is set to 2D, change to Auto or 3D.
s Signal - 3D Setup - 3D Display p.78
Pair 3D Glasses. s p.45
This projector supports the following 3D formats.
Frame Packing
Side by Side
Top and Bottom
If the 3D image cannot be viewed
The projector automatically projects a 3D image when detecting a 3D format.
Some 3D TV broadcasts may not contain 3D format signals. If this happens, follow the steps below to set the
3D format.
a
Press the button to display
menus in the order Signal - 3D Setup.
b
Set 3D Display to 3D.
c
Press the button to set the 3D
format on the AV device.
c
If you are using a device or cable that does not support 3D images, 3D projection cannot be performed.
For details on 3D format settings on the AV device, see the documentation supplied with the AV device.
When the 3D format has not been correctly set up, an image will not be correctly projected as shown
below.
If a 3D image is not projected correctly even when a 3D format is set, the synchronization timing for
the 3D Glasses may be inversed. Inverse the synchronization timing using Inverse 3D Glasses.
s Signal - 3D Setup - Inverse 3D Glasses p.78
How a 3D image is perceived varies depending on the individual.
When you start projecting a 3D image, a warning about viewing 3D images is displayed. You can turn
off this warning by setting 3D Viewing Notice to Off.
s Signal - 3D Setup - 3D Viewing Notice p.78
During 3D projection, the following Configuration menu functions cannot be changed.
Aspect (set to Normal), Noise Reduction (set to Off), Overscan (set to Off), 4K Enhancement, Super-
resolution, Image Processing, Advanced - Sharpness, Picture in Picture
How the 3D image is viewed may change depending on the temperature of the surroundings and how
long the lamp has been used. Refrain from using the projector if the image is not projected normally.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EH-TW9300W and is the answer not in the manual?

Epson EH-TW9300W Specifications

General IconGeneral
Matrix size0.74 \
Number of colors1.073 billion colors
Native aspect ratio16:9
Projection distance3 - 6.3 m
Projection technology3LCD
Contrast ratio (typical)1000000:1
Screen size compatibility50 - 300 \
Projector native resolution1080p (1920x1080)
Keystone correction, horizontal± 30 °
Zoom capabilityYes
Focal length range22.5 - 46.7 mm
Aperture range (F-F)2 - 3
Horizontal lens shift range-96.3 - 96.3 %
Lamp typeUHE
Lamp power250 W
Lamps quantity1 lamp(s)
Light source typeLamp
Service life of light source3500 h
Service life of light source (economic mode)5000 h
Color modes (2D)Bright cinema, Cinema, Dynamic, Natural
Color modes (3D)Cinema, Dynamic
Supported 3D formatsSide by side, Top and bottom
Analog signal format system-
Supported graphics resolutions640 x 480 (VGA), 720 x 480, 720 x 576, 800 x 600 (SVGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1280 x 800 (WXGA), 1366 x 768, 1600 x 900, 1920 x 1080 (HD 1080)
DVI portNo
Composite video in0
HDMI ports quantity4
Serial interface typeRS-232C
USB 2.0 ports quantity2
Ethernet LAN data rates10, 100, 1000 Mbit/s
Noise level24 dB
Country of originChina
2D/3D frequency image240/480 Hz
Noise level (economic mode)20 dB
Cables includedAC
Bundled softwareEasyMP Multi PC Projection
Operating altitude0 - 3000 m
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)5 - 35 °C
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.35 W
Power consumption (typical)355 W
Power consumption (economy mode)271 W
PlacementDesktop
Product typeStandard throw projector
Product colorWhite
Market positioningHome cinema
Cable lock slot typeKensington
Pallet width800 mm
Pallet height150 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pack1 pc(s)
Quantity per pallet16 pc(s)
Quantity per pallet layer2 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth450 mm
Width520 mm
Height170 mm
Weight11200 g
Package depth660 mm
Package width513 mm
Package height260 mm
Package weight15710 g

Related product manuals