EasyManuals Logo

Epson EH-TW9300W User Manual

Epson EH-TW9300W
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
Adjusting the Image
33
Switching the Screen Between Full and Zoom (Aspect)
You can change the input signal's type, aspect ratio, and resolution to match the Aspect of the projected
image.
The available settings vary depending on the image signal currently being projected.
c
Note that using the aspect ratio function of the projector to reduce, enlarge, or split the projected
image for commercial purposes or for public viewing may infringe upon the rights of the copyright
holder of that image based on copyright law.
a
Press the button.
c
You can make settings from the
Configuration menu.
s
Signal -
Aspect p.78
b
Use the buttons to select
the setting name, and then press the
button to confirm the selection.
c
You may not be able to change the Aspect depending on the input signal.
By normally selecting Auto, the optimum aspect is used to display the input signal. Change the setting if you
want to use a different aspect.
The table below shows the image projected on a 16:9 screen.
Input Image Setting Name
Normal Full Zoom
4:3 Images
16:9 Images
When projecting 16:9 images, Full and Zoom cannot be
selected.
Images Recorded Using
Squeeze
Letterbox Images
*

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EH-TW9300W and is the answer not in the manual?

Epson EH-TW9300W Specifications

General IconGeneral
Matrix size0.74 \
Number of colors1.073 billion colors
Native aspect ratio16:9
Projection distance3 - 6.3 m
Projection technology3LCD
Contrast ratio (typical)1000000:1
Screen size compatibility50 - 300 \
Projector native resolution1080p (1920x1080)
Keystone correction, horizontal± 30 °
Zoom capabilityYes
Focal length range22.5 - 46.7 mm
Aperture range (F-F)2 - 3
Horizontal lens shift range-96.3 - 96.3 %
Lamp typeUHE
Lamp power250 W
Lamps quantity1 lamp(s)
Light source typeLamp
Service life of light source3500 h
Service life of light source (economic mode)5000 h
Color modes (2D)Bright cinema, Cinema, Dynamic, Natural
Color modes (3D)Cinema, Dynamic
Supported 3D formatsSide by side, Top and bottom
Analog signal format system-
Supported graphics resolutions640 x 480 (VGA), 720 x 480, 720 x 576, 800 x 600 (SVGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1280 x 800 (WXGA), 1366 x 768, 1600 x 900, 1920 x 1080 (HD 1080)
DVI portNo
Composite video in0
HDMI ports quantity4
Serial interface typeRS-232C
USB 2.0 ports quantity2
Ethernet LAN data rates10, 100, 1000 Mbit/s
Noise level24 dB
Country of originChina
2D/3D frequency image240/480 Hz
Noise level (economic mode)20 dB
Cables includedAC
Bundled softwareEasyMP Multi PC Projection
Operating altitude0 - 3000 m
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)5 - 35 °C
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.35 W
Power consumption (typical)355 W
Power consumption (economy mode)271 W
PlacementDesktop
Product typeStandard throw projector
Product colorWhite
Market positioningHome cinema
Cable lock slot typeKensington
Pallet width800 mm
Pallet height150 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pack1 pc(s)
Quantity per pallet16 pc(s)
Quantity per pallet layer2 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth450 mm
Width520 mm
Height170 mm
Weight11200 g
Package depth660 mm
Package width513 mm
Package height260 mm
Package weight15710 g

Related product manuals