EasyManuals Logo

Epson EH-TW9300W User Manual

Epson EH-TW9300W
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #72 background imageLoading...
Page #72 background image
Using the Projector on a Network
71
h
Assign an IP address to the projector as necessary.
If your network uses DHCP, select IP Settings to set the DHCP setting to On.
If you are not using DHCP, select IP Settings to set the DHCP setting to Off, and then enter the projector's IP
Address, Subnet Mask, and Gateway Address.
i
When you have finished selecting settings, select Complete and then follow the on-screen
instructions to save your settings and exit the menus.
j
Press the button on the remote control. The settings are complete when you see the
correct IP address on the LAN standby screen.
When you have finished making wireless settings for your projector, you need to make wireless settings on
the connected device. Then start the network software to send images to your projector through a wireless
network.
c
To prevent the SSID and IP address from being displayed on the LAN standby screen or the Home
screen, set SSID Display and IP Address Display to Off.
s
Network - Network Configuration -
Wireless LAN p.88
Selecting the Computer's Wireless LAN Settings
Before connecting to the projector, select the correct wireless network on your computer.
Selecting wireless network settings in Windows
a
To access your wireless utility software, double-click the network icon on the Windows
taskbar.
b
When connecting in Advanced connection mode, select the network name (SSID) of the
network the projector is connecting to.
c
Click Connect.
Selecting wireless network settings in OS X
a
Click the AirPort icon on the menu bar at the top of the screen.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EH-TW9300W and is the answer not in the manual?

Epson EH-TW9300W Specifications

General IconGeneral
Matrix size0.74 \
Number of colors1.073 billion colors
Native aspect ratio16:9
Projection distance3 - 6.3 m
Projection technology3LCD
Contrast ratio (typical)1000000:1
Screen size compatibility50 - 300 \
Projector native resolution1080p (1920x1080)
Keystone correction, horizontal± 30 °
Zoom capabilityYes
Focal length range22.5 - 46.7 mm
Aperture range (F-F)2 - 3
Horizontal lens shift range-96.3 - 96.3 %
Lamp typeUHE
Lamp power250 W
Lamps quantity1 lamp(s)
Light source typeLamp
Service life of light source3500 h
Service life of light source (economic mode)5000 h
Color modes (2D)Bright cinema, Cinema, Dynamic, Natural
Color modes (3D)Cinema, Dynamic
Supported 3D formatsSide by side, Top and bottom
Analog signal format system-
Supported graphics resolutions640 x 480 (VGA), 720 x 480, 720 x 576, 800 x 600 (SVGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1280 x 800 (WXGA), 1366 x 768, 1600 x 900, 1920 x 1080 (HD 1080)
DVI portNo
Composite video in0
HDMI ports quantity4
Serial interface typeRS-232C
USB 2.0 ports quantity2
Ethernet LAN data rates10, 100, 1000 Mbit/s
Noise level24 dB
Country of originChina
2D/3D frequency image240/480 Hz
Noise level (economic mode)20 dB
Cables includedAC
Bundled softwareEasyMP Multi PC Projection
Operating altitude0 - 3000 m
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)5 - 35 °C
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.35 W
Power consumption (typical)355 W
Power consumption (economy mode)271 W
PlacementDesktop
Product typeStandard throw projector
Product colorWhite
Market positioningHome cinema
Cable lock slot typeKensington
Pallet width800 mm
Pallet height150 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pack1 pc(s)
Quantity per pallet16 pc(s)
Quantity per pallet layer2 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth450 mm
Width520 mm
Height170 mm
Weight11200 g
Package depth660 mm
Package width513 mm
Package height260 mm
Package weight15710 g

Related product manuals