Maintenance
112
Panel Alignment
Adjusts the pixel color shift of the LCD display. You can adjust the pixels horizontally and vertically by 0.125
pixel within a range of ±3 pixel.
c
•
Image quality may decline after performing LCD alignment.
•
Images for pixels that extend beyond the edge of the projected screen are not displayed.
a
Press the button while
projecting, and then select Display
from Extended.
b
Select Panel Alignment, and then
press the
button.
c
Enable Panel Alignment.
(1)
Select Panel Alignment, and then
press the
button.
(2)
Select On, and then press the
but-
ton.
(3) Press the
button to return to the
previous screen.
d
Select the color you want to adjust.
(1)
Select Select Color, and then press the
button.
(2)
Select R (red) or B (blue), and then
press the
button.
(3) Press the
button to return to the
previous screen.
e
Select the grid color displayed when
making adjustments from Pattern
Color.
(1)
Select Pattern Color, and then press
the
button.
(2) Select a combination of R (red), G
(green), and B (blue) for the grid color.
R/G/B: Displays a combination all
three colors; red, green and blue. The
actual color of the grid is white.
R/G: This is available when R is selected
from Select Color. Displays a combi-
nation of two colors; red and green.
The actual color of the grid is yellow.
G/B: This is available when B is selected
from Select Color. Displays a combi-
nation of two colors; green and blue.
The actual color of the grid is cyan.
(3) Press the
button to return to the
previous screen.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
