EasyManua.ls Logo

Epson EH-TW9300W - Specifications

Epson EH-TW9300W
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix
121
Specifications
Product name
EH-TW9300W/EH-TW9300/EH-TW8300W/EH-TW8300/EH-TW7300
Appearance
520 (W) x 170 (H) x 450 (D) mm (not including adjustable foot)
Panel Size
0.74" wide
Display method
Polysilicon TFT active matrix
Resolution
1920 (W) x 1080 (H) x 3
Focus adjustment
Motorized
Zoom adjustment
Motorized (Approx. 1 to 2.1)
Lamp (light source)
UHE lamp 250 W, Model No.: ELPLP89
Lamp replacement time
3400 hours
Power supply
100 - 240 V AC ±10%, 50/60 Hz, 3.8 - 1.7 A
Power con-
sumption
100 to 120 V area
Rated power consumption: 373 W
Standby power consumption (Communication On): 2.3 W
Standby power consumption (Communication Off): 0.27 W
220 to 240 V area
Rated power consumption: 355 W
Standby power consumption (Communication On): 2.4 W
Standby power consumption (Communication Off): 0.35 W
Operating altitude
Altitude 0 to 3,000 m
Operating temperature
+5 to +35°C
*
(No condensation)
Storage temperature
-10 to +60°C (No condensation)
Mass
Approx. 11 kg
*
The operating temperature is +5 to +30°C at an altitude of 2287 to 3000m.
Connectors PC port 1
Mini D-Sub15-pin (female) blue
HDMI port 2
For HDMI HDCP2.2 (HDMI1 port only), for CEC sig-
nals, for 3D signals, Deep Color
RS-232C port 1
Mini D-Sub 9-pin (male)
Trigger Out port 1
Stereo mini jack (3.5Φ)
LAN port 1
RJ-45
Service port
*
1
USB connector (Type B)
USB port
*
1
USB connector (Type A)
USB port (for Opt.HDMI
power supply)
*
1
*
Supports USB 2.0. However, USB ports are not guaranteed to operate all devices that support USB.
This product is also designed for IT power distribution system with phase-to-phase voltage 230V.

Table of Contents

Related product manuals