Epson EMP-S3 User Manual

60
Maintenance
E
Install the new lamp.
Insert the new lamp so that the lamp fits in place correctly and
once it is fully inserted, tighten the two screws.
F
Install the lamp cover.
Slide the lamp cover and tighten the cover fixing screws.
•Install the lamp securely. If the lamp cover is removed,
the lamp turns off automatically as a safety precaution.
Moreover, the lamp will not turn on if the lamp or the
lamp cover is not installed correctly.
•The lamp contains mercury. Dispose of used lamps
properly in accordance with your local regulations.

Epson EMP-S3 Specifications

General

Brightness	1600 ANSI lumens
Resolution	800 x 600 (SVGA)
Contrast Ratio	400:1
Display Technology	3LCD
Screen Size	30 - 300 inches
Lamp Type	170W UHE
Lamp Life	3000 hours (standard), 4000 hours (eco mode)
Projection Lens	Manual focus
Input Ports	VGA, Composite, S-Video
Output Ports	VGA
Operating Temperature	5°C to 35°C