EPSON EPL-6200/EPL-6200L Revision A
Product Description Basic Specifications 25
Consumables:
Developer Cartridge (black toner)
Photoconductor Unit (Drum Cartridge)
NOTE:
Refer to
“1.2.9 Consumable Components (p.32)”
.
Regular Replacement Parts
Without taking into account replacement by the user, the lives of regular
replacement parts are as follows:
Fuser Unit: 50,000 pages
Transfer Roller: 50,000 pages
Power Supply:
100 V ± 10% 50 ~ 60 Hz ±3 Hz
110 V
-
10% 50 ~ 60 Hz ± 3 Hz
127 V + 6% 50 ~ 60 Hz ±3 Hz
220 ~ 240 V ± 10% 50 ~ 60 Hz ±3 Hz
Applicable low-voltage power supplies are 100~120 V and 220~240 V only.
Power Consumption
Product Lifetime
Main Unit
180,000 printed pages or 5 years, whichever comes first. (with periodic part
replacement) → See “ Consumable Components (p.32)”.
Noise
Note “*1”: The fan runs at a half speed.
However, it runs at a full speed for 20 seconds after printing.
Exhaust Gas
Note : By Blue Angel Mark measurement method
Hazardous Materials:
None of the OPC, toner and plastics contains hazardous materials.
NOTE:
For safety standards, refer to
“1.2.8 Compliance with Standards and
Regulations (p.31)”
.
Current Consumption (EPL-6200)
Lower cassette: 5 V/ 0.03 A
24 V/ 0.5 A
Duplex Unit: 5 V/ 0.3 A
24 V/1.5 A
Table 1-20. Power Consumption
EPL-6200 EPL-6200L
100 V 12 0V
200 V
System
100 V 120 V
200 V
System
Maximum current rated 9.2 A 8.0 A 4.5 A 9.2 A 8.0 A 4.5 A
Power
Consumption
Maximum 900 W 900 W 861 W 900 W 900 W 825 W
Average at continuous
printing
376 Wh 370 Wh 372 W 378 Wh 372 Wh 357 W
Average during
standby with heater on
47 Wh 44 Wh 48 Wh 47 Wh 46 Wh 48 Wh
Average during sleep
mode with heater off
6 Wh 7 Wh 7 Wh 7 Wh 8 Wh 7 Wh
Power off mode 0 Wh 0 Wh 0 Wh 0 Wh 0 Wh 0 Wh
Table 1-21. Noise
During standby During printing Sleep mode
Main Unit only 30.0dB(A)
*1
54.0dB(A) Background noise
Table 1-22. Exhaust Gas
Gas Value
Ozone Concentration 0.02 mg/m
3
max.
Styrene Concentration 0.07 mg/m
3
max.
Dust Concentration 0.15 mg/m
3
max.
To Next Page
