Epson EPL-6200L - 1.4 Controller Specification

EPSON EPL-6200/EPL-6200L Revision A
Product Description Controller Specification 38
1.4 Controller Specification
1.4.1 Basic Controller Specifications
EPL-6200
 CPU TMPR4955BFG-200MHz (Same as for EPL-N2500)
 RAM
<Standard> 8 MB (SDRAM) (mounted on ROM DIMM board)
<DIMM Option> 16 MB, 32 MB, 64 MB, 128 MB (SDRAM, 1
slot )
Maximum136 MB
(with 128 MB SDRAM DIMM installed)
 ROM
<Fonts, Program> Mixed in 16Mbyte (mounted on ROM DIMM board)
Flash memory by initial production; mask ROM by steady
production
<Expansion ROM> None
 Host Interface
<Standard>
Parallel IEEE1284 compliant bi-directional interface, Type B
connector
Compatibility, Nibble, ECP
USB USB Revision 1.1
Option Type B slot (1 slot)
 Control Panel 3 switches and 6 LEDs
 Installation Format Fixed to the printer body
 Other A mechanical control function is incorporated
 Installed emulations PCLXL, PCL5e, GL/2, FX, ESCP2, I239X, ESC/Page
PostScript 3
EPL-6200L
 CPU EPSON 32bit RISC S1C33000 48MHz
 RAM
<Standard> 2MB
<Expansion> None
 Interface IEEE 1284 compatible parallel interface (ECP, Nibble)
 USB USB Revision 1.1 compatible, USB ID compatible
 Panel 2 LEDs
 Other expansion slots None