Epson EPL-6200L - Differences in Specifications between Intended Markets; Differences in Specifications

EPSON EPL-6200/EPL-6200L Revision A
Product Description Differences in Specifications between Intended Markets 65
1.13 Differences in Specifications between Intended Markets
1.13.1 Differences in Specifications
Table 1-60. Differences in Specifications between Intended Markets
Model EPL-6200 LP-2500 EPL-6200L LP-1400
Intended Markets
South
America
and
Taiwan
Europe, Pacific, China and
Korea
Japan
South
America
and
Taiwan
Europe, Pacific, China and
Korea
Japan
Resolution /Printing
Speed
1200 dpi: 10 ppm, 600/300 dpi: 20 ppm ← 600 dpi: 20 ppm ←
Toner Life
Pre-installed: 3000 sheets
Replaced: 3000 sheets or 6000 sheets
Pre-installed: 1500 sheets
Replaced: 6000 sheets
Pre-installed: 1500 sheets
Replaced: 3000 sheets or 6000
sheets
←
Standard RAM
8 MB 16 MB 2 MB ←
RAM Expansion
136 MB max. 144 MB None ←
Optional ROM Slot
1 slot (for PS or IPDS option) None None ←
Type-B Slot
Supported ← None ←
Control Panel
3 SW/ 6 LEDs ← 2LEDs ←
Main Board Assy
C533MAIN
(WW spec)
C533MAIN
(J spec)
C534MAIN
(WW spec)
C534MAIN
(J spec)
Memory Board Assy
• C533PROG (WW spec) (initial products)
• C533PROG-C (WW spec) (by stable
production)
• C533PROG (J spec) (initial products)
• C533PROG-B (J spec) (by stable production)
- -
Optional Units
• Lower Cassette Unit
• Duplex Unit (Lower cassette required)
• Lower Cassette Unit - -
Power Supply Unit
120V
system
220V system 100V system
120V
system
220V system 100V system
C H E C K
P O I N T
There is a difference in jumper setting between “WW spec” and “J
spec” of C533MAIN/C534MAIN. Refer to “Jumper Setting” (p.66).