6.
Enter the date in the exact format shown in the box. Use
two digits for the month and day and four digits for the year;
the Setup program automatically inserts the dashes. For
example, to set the date for March 29, 1990, you would type
the following:
03291990
You can use the backspace key to make corrections.
If you enter an invalid date-for example, a number greater
than 12 for the month or greater than the number of days in
that month-the computer beeps and ignores your entry.
Try again.
When the date is correct, press Enter.
7.
Check the new time and date to be sure they are correct.
Then press once or twice to return to the main Setup
menu.
Running the
Setup Program
2-21
To Next Page