Epson FX Series User Manual

ESC Dec Hex Symbol Function
ESC 47 2F /
ESC 48 30 0
ESC 49 31 1
ESC 50 32 2
Selects a vertical tab channel.
Format:
CHR$(27)“/“CHR$(n)
where n
= 0 - 7.
Sets line
spacing to 1/8-inch (g-dot).
Sets line
spacing to 7/72-inch (7-dot).
Returns line spacing to the default of 1/6 inch
(12-dot).
ESC 51
33
3 Sets line
spacing to n/216-inch (1/216-inch is
1/3 dot). Stays on until changed. Format:
CHR$(27)“3”CHR$(n)
where n
= 0 - 255.
ESC 52
34 4
ESC 53
35 5
ESC 54
36 6
ESC 55 37 7
ESC 56
38 8
ESC 57
39 9
ESC 58
3A :
ESC 60 3C <
Turns Italic Mode ON.
Turns Italic Mode OFF
Enables the printing of the Italic international
characters, which are stored in locations
128 - 159 and 255.
Turns off CHR$(27)“6”. Restores 126 - 159
and 255 to function as control codes.
Disables the paper-out sensor.
Enables the paper-out sensor
Copies the ROM user-defined character set to
RAM. Format:
CHR$(27)“:“CHR$(n
1
)CHR$(n
2
)CHR$(n
3
);
where n
1
, n
2
, and n
3
are all 0. (They are
included for future expansion.) The RAM
character set must be activated with
CHR$(27) " % “, and DIP switch 1-4 must be
off.
Turns 1-line Unidirectional Mode ON. Prints
each line from left to right.
274

Epson FX Series Specifications

General

Connectivity	Parallel
Paper Handling	Friction feed, Tractor feed
Emulation	Epson ESC/P
Noise Level	55 dB(A)
Print Method	Impact dot matrix