The printer is not connected to a wireless (Wi-Fi) network.
The printer is searching for SSID, unset IP address, or having a problem with a wireless
(Wi-Fi) network.
The printer is connected to a wireless (Wi-Fi) network.
The number of bars indicates the signal strength of the connection. The more bars
there are, the stronger the connection.
The printer is not connected to a wireless (Wi-Fi) network in Wi-Fi Direct (Simple AP)
mode.
The printer is connected to a wireless (Wi-Fi) network in Wi-Fi Direct (Simple AP) mode.
Entering Characters
To enter characters and symbols for network settings and register contacts from the control panel, use the
u
,
d
,
l
, and
r
buttons and the soware keyboard on the LCD screen. Press the
u
,
d
,
l
, or
r
button to select a
character or function button on the keyboard, and then press the OK button. When you have nished entering
characters, select OK, and then press the OK button.
Function button Descriptions
l
r
Moves the cursor to the left or right.
A 1 # Switches the character type. You can enter alphanumerics or symbols.
You can also switch them by using the
button.
Enters a space.
Deletes a character to the left (backspace).
OK Enters the selected characters.
Viewing Animations
You can view animations of operating instructions such as loading paper or removing jammed paper on the LCD
screen.
Guide to the Control Panel
>
Viewing Animations
24