Rings to Answer:
Select the number of rings that must occur before the printer automatically receives a fax.
Remote Receive:
Remote Receive
When you answer an incoming fax call on a phone connected to the printer, you can start
receiving the fax by entering the code using the phone.
Enter Start Code
Set the start code of Remote Receive. Enter two characters using 0-9, *, #.
Rejection Fax:
Rejection Fax
Select options to reject receiving junk faxes.
❏ Rejection Number List: If the other party's phone number is in the rejection number list, set
whether to reject the incoming faxes.
❏ Fax Header Blank: If the other party's phone number is blocked, set whether to reject
receiving the faxes.
❏ Caller not in Contacts: If the other party's phone number is not in the contacts, set whether
to reject receiving the faxes.
Edit Blocked Number list
You can register up to 30 fax numbers to reject the faxes and calls. Enter up to 20 characters
using 0-9, *, #, or space.
Related Information
& “Making the Printer Ready to Send and Receive Faxes” on page 92
& “Making Settings for a PBX Phone System” on page 94
& “Receiving Incoming Faxes” on page 106
& “Making Settings for Blocking Junk Faxes” on page 96
Receive Settings Menu
You can nd the menu on the printer's control panel below:
Settings > Fax Settings > Receive Settings
Save to Computer:
Saves received faxes as PDF les on a computer connected to the printer. You can only set this to Ye s
by using the FAX Utility (application). You cannot enable this from printer's control panel. Install the
FAX Utility on the computer in advance. Aer setting this to Ye s , you can change this to Yes a n d
Print from the printer's control panel.
Auto Reduction:
Prints received faxes with large-size documents reduced to
t
on the paper in the paper source.
Reducing may not always be possible depending on the received data. If this is turned o, large
Product Information
>
Settings Menu List
>
Fax Settings
264
To Next Page
Loading...
Need help?
General
