Epson LabelWorks LW-700 User Manual

• Use AA alkaline batteries or nickel-hydride rechargeable batteries.
Note: SANYO eneloop are the only compatible rechargeable batteries, and they may not be available
in all regions. If you use these nickel-hydride rechargeables, follow the instructions on the batteries
and the charger.
• Do not use new and old batteries together or mix different types of batteries.
• Insert batteries so that the polarities (+ and –) are correct.
• Remove dead batteries promptly.
• Do not heat batteries or throw them in fire or water.
• Do not remove batteries with metal objects such as tweezers or the tip of a pen.
• Make sure to follow local battery disposal regulations.
Parent topic: Important Safety Instructions
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Caution
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate this equipment.
An AC adapter with ferrite core must be used for RF interference suppression.
For United States Users
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio or television reception. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause interference to radio and television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
127

Epson LabelWorks LW-700 Specifications

General

Print technology	Thermal transfer
Maximum resolution	180 x 180 DPI
Maximum print height	18 mm
Maximum printing width	24 mm
Ethernet LAN	No
PC connected	Yes
Optional connectivity	USB 2.0
Country of origin	China
Battery type	AA
Power consumption (off)	1.44 W
Power consumption (standby)	6.99 W
Number of batteries supported	6
Power consumption (PowerSave)	0.22 W
Minimum storage drive space	100 MB
Compatible operating systems	Microsoft Windows XP/7/8\\r Mac OS 10.4+
Display	LED
Product color	White
Keyboard layout	QWERTY
Number of fonts	14
Number of styles	16
Built-in barcodes	CODABAR (NW-7), Code 128 (A/B/C), Code 39, EAN13, EAN8, ITF-14, MaxiCode, PDF417, QR Code, UPC-A, UPC-E
Number of printing lines (max)	8
Sustainability certificates	ENERGY STAR
Pallet width	800 mm
Pallet height	1770 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pallet	90 pc(s)
Minimum order quantity	5 pc(s)
Quantity per pallet (UK)	120 pc(s)
Quantity per pallet layer	15 pc(s)
Quantity per pallet layer (UK)	20 pc(s)
Package depth	320 mm
Package width	270 mm
Package height	140 mm
Package weight	1964 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	235 mm
Width	180 mm
Height	80 mm
Weight	770 g