Parent topic: Solving Problems
Related references
Label Editor Printer Settings
Related tasks
Cleaning the Print Head
Adjusting Print Density
Printing Labels With Label Editor Lite
Changing the Label Font
Creating a Basic Label in Label Editor
Creating a Basic Label in Label Editor Lite
Solutions to Tape Cutting Problems
If the printer does not cut after printing, try these solutions:
• Make sure Auto Cut is selected on the printer.
• If you are printing from your computer, make sure the cut setting option is set.
• If the cutter blade is dull, contact Epson for technical support.
Parent topic: Solving Problems
Related references
Label Editor Printer Settings
Where to Get Help
Related tasks
Feeding and Cutting the Tape
Printing Labels With Label Editor Lite
Solutions to Problems With Saved Labels
If you cannot find a saved label or ribbon design, try these solutions:
• Make sure you have not accidentally deleted the label or ribbon design.
• If the label printer has been reset, all saved labels are deleted.
• If you unplug the AC adapter or remove the batteries during operation, text may be lost.
Parent topic: Solving Problems
118