EasyManuals Logo

Epson LabelWorks LW-700 User Manual

Epson LabelWorks LW-700
129 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #125 background imageLoading...
Page #125 background image
Do not block or insert objects into the AC adapter port or tape ejection slot.
Avoid locations that are subject to rapid changes in heat or humidity, shocks or vibrations, or dust.
Do not place or store the product in the following locations: outdoors or in direct sunlight; near sources
of excessive heat, humidity, shocks, vibrations, or dust; where it may get wet or be exposed to
excessive humidity; on an unstable place such as a shaky or inclined surface; near potential sources
of electromagnetic interference such as loudspeakers or the base units of cordless telephones.
The product and product manuals may come packaged in plastic bags. Keep plastic bags away from
small children to avoid any risk of suffocation.
If you will not be using the product for a long period, unplug the power cord and remove the batteries.
Before cleaning, unplug the power cord and remove the batteries. Use only a dry, soft cloth to clean
the product; do not use liquid or chemical cleaners.
Operate the keyboard gently.
Take care not to cut your fingers when cutting tape with scissors.
Turn the power off after use.
Do not unplug the AC adapter until the power off message disappears.
WARNING: The cords included with this product contain chemicals, including lead, known to the State of
California to cause birth defects or other reproductive harm. Wash hands after handling. (This notice is
provided in accordance with Proposition 65 in Cal. Health & Safety Code § 25249.5 and following.)
Parent topic: Important Safety Instructions
Tape Cartridge Safety Instructions
Use only compatible LC tape cartridges with this label: .
To avoid damage, do not drop or disassemble tape cartridges.
Feed the tape using the key + the button or the software commands. Do not forcibly pull out the
tape. Otherwise, you may damage the tape cartridge.
Do not try to print with an empty tape cartridge; this may overheat the print head and damage the
product.
Note: Tape cartridges contain ink ribbons. Make sure to follow local ink disposal regulations.
Parent topic: Important Safety Instructions
125

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson LabelWorks LW-700 and is the answer not in the manual?

Epson LabelWorks LW-700 Specifications

General IconGeneral
Print technologyThermal transfer
Maximum resolution180 x 180 DPI
Maximum print height18 mm
Maximum printing width24 mm
Ethernet LANNo
PC connectedYes
Optional connectivityUSB 2.0
Country of originChina
Battery typeAA
Power consumption (off)1.44 W
Power consumption (standby)6.99 W
Number of batteries supported6
Power consumption (PowerSave)0.22 W
Minimum storage drive space100 MB
Compatible operating systemsMicrosoft Windows XP/7/8\\r Mac OS 10.4+
DisplayLED
Product colorWhite
Keyboard layoutQWERTY
Number of fonts14
Number of styles16
Built-in barcodesCODABAR (NW-7), Code 128 (A/B/C), Code 39, EAN13, EAN8, ITF-14, MaxiCode, PDF417, QR Code, UPC-A, UPC-E
Number of printing lines (max)8
Sustainability certificatesENERGY STAR
Pallet width800 mm
Pallet height1770 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pallet90 pc(s)
Minimum order quantity5 pc(s)
Quantity per pallet (UK)120 pc(s)
Quantity per pallet layer15 pc(s)
Quantity per pallet layer (UK)20 pc(s)
Package depth320 mm
Package width270 mm
Package height140 mm
Package weight1964 g
Quantity per pack1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth235 mm
Width180 mm
Height80 mm
Weight770 g

Related product manuals