Assembling the Printer
Installing the ribbon cartridge
Before installing the ribbon cartridge, make sure that the power
cord is not plugged into an electrical outlet.
1. If necessary, lift the printer cover up and off. Grasp both ends
of the clear plastic paper-tension unit and lift it up and off also.
WARNING: Never move the print head while the printer is
turned on; this can damage the printer. Also, if you just
used the printer, the print head may be hot. Let it cool
for a few minutes before touching it.
2. Slide the print head to the middle of the printer.
1-6
Setting Up the Printer
To Next Page
Loading...
