Cut-Sheet Feeders
Loading paper or envelopes with the high-capacity cut-sheet
feeder
To load paper using the high-capacity cut-sheet feeder follow these
steps:
1. Pull the lock levers on the left and right paper guides forward.
2. Slide the left paper guide until the ridge on the paper guide is
aligned with the triangle mark on the front of the cut-sheet
feeder; then lock the paper guide in place by pushing back on
its lock lever. Next, slide the right paper guide to roughly match
the width of your paper. Slide the paper support midway
between
4-6 Using Printer Options
To Next Page
Loading...
