DIP Switches
By setting the two printer’s sets of DIP switches, you can control
various printer features, such as the graphics character set and page
length. New settings take effect whenever the printer is turned on.
The DIP switches are located inside a compartment next to the
control panel.
Changing a DIP-switch setting
To change a DIP-switch setting, follow these steps:
1. Turn off the printer.
2. Open the DIP-switch cover.
3. Use a pointed instrument, such as the tip of a pen, to turn a
switch on or off. The section on DIP-switch functions lists the
setting for each switch.
4. Close the DIP-switch cover.
The new DIP-switch settings take effect when you turn on the
printer.
3-6
Using the Printer
To Next Page
Loading...
