Cut-Sheet Feeders
7.
Set the envelope levers on each side of the cut-sheet feeder. Pull
the levers forward for single sheets of paper or push them back
for envelopes.
8. Push the paper-set levers back to clamp the paper or envelopes
against the guide rollers.
Note: Even when the cut-sheet feeder is installed, you can also
insert single sheets using the front paper slot or the slot between
the paper guide and stacker.
The cut-sheet feeder automatically loads paper when you send print
data to the printer (as long as the PAUSE light is not on). You can
also load paper from the cut-sheet feeder by pressing the
LOAD/EJECT
button.
4-8
Using Printer Options
To Next Page
Loading...
