64
Chapter 4 Advanced Usage
Auto power off
• Enable (20 minutes)
• Disable (initial setting)
Paper Position at Power On
Function Select
• Enabled
• Disabled (initial setting)
Position Select
• Cut Position
• Top Position (initial setting)
Resizing method for graphic data scaling
Select the resizing method for graphic data scaling.
• None (initial setting)
• Auto
• Manual
Algorithm
• Simple thinning
• Nearest neighbor
• Bilinear
• Bicubic
Scaling factor for manual adjustment
50 to 200%
Batch rotate print (Upside Down)
When this function is enabled, each receipt is rotated 180 degrees and printed.
• Enable
• Disable (initial setting)
• Using the TM Utility, TM-P20II Utilirty, or the ESC/POS command, it can be set in the range of 0
(disabled) to 60 minutes in 1-minute increments.
• When the USB interface is connected, this setting is disabled (no auto power off).
• For details on the auto power off function, see "Auto Power-Off" on page 24.
This menu
allows you to set the paper position immediately after closing the roll paper cover,
resetting the printer, or turning on the printer.
To Next Page
Loading...
