Viewing and Playing Images, Audio, and Video 30
Viewing Files on a TV
You can connect the P-2000 to a TV or AV projector and
view your images, videos, and slide shows.
You will need a camcorder to TV/VCR audio/video cable
(A/V cable with 3.5 mm mini-plug to 3 RCA phono plugs).
You can purchase the cable at an electronics store.
1 Connect the three RCA plugs to the video and audio
IN
jacks on your TV.
2 Connect the mini-plug on the other end to the
A/V Out
connector on the side of the P-2000. The LCD screen
turns off.
3 Set the TV display to video input from the P-2000.
Note:
Some TVs may crop your images on the top and bottom.
You can now use all of the P-2000 controls to play slide
shows, photos, and videos on your TV.
To Next Page
Loading...
