Maintenance and Troubleshooting 52
Chapter 7
Maintenance and Troubleshooting
This chapter describes how to clean the P-2000 and solve
problems.
Cleaning the P-2000
Follow these guidelines when cleaning the P-2000:
❍ Turn off the P-2000 before cleaning.
❍ Use a clean, dry cloth to wipe it clean.
❍ Do not use harsh or abrasive cleaners.
❍ If necessary, clean the battery contacts with a dry cloth.
Error Messages
When a problem occurs, an error message or icon may
appear on the LCD. Refer to the following table to diagnose
an error message. For more assistance, see “Problems and
Solutions” on page 53.
Error message Description
A file access error has
occurred. Do not eject the
memory card if it is being
accessed.
Wait until the Access light turns
off; then reinsert the memory
card and try again.
An error occurred while
verifying. Files will not be
deleted.
Some files to be deleted from
the memory card were skipped.
Check the files.
Some errors occurred
while copying. Copying
was canceled.
Some files were skipped. The
memory card may be
write-protected. Check the
memory card and try again.
To Next Page
Loading...
Need help?
General
