Connecting to a Projector on a Different Subnet
17
B Enter the IP address or the projector name for the projector
you want to connect to, and click OK.
The search results are displayed on the EasyMP Network Projec-
tion projector selection screen.
Provided the target projector has been identified, select that projec-
tor, and then click Connect to establish a connection.
Once you have saved projector information as a profile, you do not
have to specify the relevant details every time you perform a search.
s "Making a Profile" p.17
Performing a Search with a Profile
You can save a search for a frequently used projector as a profile. A
profile is a file containing all of the information pertaining to a given
projector, such as the projector name and its IP address. You can specify
a profile to search for a projector instead of specifying relevant details
such as the IP address and projector name. For example, by creating a
group of profiles for each place where a projector is setup and managing
them with folders, the target projector can be found quickly.
This section explains how to create and edit a profile.
Making a Profile
Profiles are made by saving search results.
For details on how to edit a previously saved profile, see the following
section.
s "Managing a Profile" p.19
A While the projector is displayed on the EasyMP Network
Projection projector selection screen, click Save in the
profile.
The Save in the profile screen is displayed.
To Next Page
Loading...
Need help?
Projection System
Power
Weight and Dimensions
