Epson PowerLite 1880 User Manual

Set options
33
Set options
You can make option settings such as the processing method when
EasyMP Network Projection starts.
Access Set options from the main screen of EasyMP Network Projection.
A Click Set options on the EasyMP Network Projection main
screen.
The Set options screen is displayed.
B Set each of the items.
Confirm the details of the set items in the following sections. When
you have made all the necessary settings, click OK to close the Set
options screen.
q
You can also access Set options by clicking on the toolbar. When you
access Set options from toolbar, the General settings tab is not displayed.
General settings tab
Use full-screen
video transfer
Plays back a movie file at full screen. If the projector
does not support movie sending, this function
cannot be set.
Encrypt
communications
Select to Encrypt and transmit data. Even if data is
intercepted, it cannot be decrypted.
Display
Connection Mode
Selection window
on startup
Set whether or not the Quick Connection
Mode/Advanced Connection Mode screen is
displayed when EasyMP Network Projection starts.
Clear this checkbox once you have settled on a
regular startup method.

Epson PowerLite 1880 Specifications

Projection System

projection system	Epson 3LCD, 3-chip technology
native resolution	1024 x 768 (XGA)
color light output	4000 lumens

Power

power supply voltage	100 – 240 V ± 10%, 50/60 Hz AC
power consumption (normal mode)	381 W
power consumption (eco mode)	309 W

Lamp

lamp type	275 W UHE E-TORL
lamp life (normal mode)	3000 hours
lamp life (eco mode)	4000 hours

Operating Environment

operating temperature	41 ˚ to 95 ˚F (5 ˚ to 35 ˚C)
fan noise (normal mode)	39 dB
fan noise (eco mode)	35 dB

Projection Lens

f-number	1.51 – 1.99
focal length	18.2mm – 29.2mm
zoom ratio	optical zoom 1.0 – 1.6

Weight and Dimensions

dimensions including feet	13.5" x 10.3" x 4.2"
dimensions excluding feet	13.5" x 10.3" x 3.6"
weight	7.4 lb