Epson PowerLite 1880 User Manual

Using Multi-Screen Display
24
Arrangement example 2
Procedure Before Using the Multi-screen Display
Function
A Set the virtual display.
s "Setting the Virtual Display" p.24
In a Windows environment, enable the virtual displayg driver as
necessary. Also, for both Windows and Mac OS, set up the virtual
display arrangement.
B Allocate the image to be projected.
s "Allocating the Image to be Projected" p.29
Open the file to be projected, and then move the screen to the vir-
tual display according to the actual projection arrangement.
C Project the allocated images.
s "Projecting the Allocated Images" p.30
Allocate a virtual display number to a projector, and then start pro-
jection.
Setting the Virtual Display
This section explains the virtual display for arrangement example 1.
s "Example of Adjusting the Virtual Display" p.23
Enable the virtual display driver (Windows only)
Enable the virtual displayg driver. If you have already enabled the virtual
display while installing EasyMP Network Projection, this operation is not
necessary. Go to the following section.
A Actual monitor image
PowerPoint file presenter tools
B Image of virtual display
Slide Show using a PowerPoint file

Epson PowerLite 1880 Specifications

Projection System

projection system	Epson 3LCD, 3-chip technology
native resolution	1024 x 768 (XGA)
color light output	4000 lumens

Power

power supply voltage	100 – 240 V ± 10%, 50/60 Hz AC
power consumption (normal mode)	381 W
power consumption (eco mode)	309 W

Lamp

lamp type	275 W UHE E-TORL
lamp life (normal mode)	3000 hours
lamp life (eco mode)	4000 hours

Operating Environment

operating temperature	41 ˚ to 95 ˚F (5 ˚ to 35 ˚C)
fan noise (normal mode)	39 dB
fan noise (eco mode)	35 dB

Projection Lens

f-number	1.51 – 1.99
focal length	18.2mm – 29.2mm
zoom ratio	optical zoom 1.0 – 1.6

Weight and Dimensions

dimensions including feet	13.5" x 10.3" x 4.2"
dimensions excluding feet	13.5" x 10.3" x 3.6"
weight	7.4 lb