To Next Page
M
maryfosterAug 27, 2025
How to fix horizontal banding on Epson Printer?
- FFrances AndersenAug 27, 2025
If you're experiencing horizontal banding with your Epson Printer, try running the head cleaning utility to clear any clogged ink nozzles.
How to fix horizontal banding on Epson Printer?
If you're experiencing horizontal banding with your Epson Printer, try running the head cleaning utility to clear any clogged ink nozzles.
What to do if disc does not feed on Epson PP-100AP Printer?
If a disc does not feed from the input stacker of your Epson Printer, follow these steps: 1. Open the disc cover. 2. Remove unprinted discs from the stacker. 3. Fan a stack of discs to prevent them from sticking together. 4. Insert discs back in the stacker. 5. Close the disc cover. 6. Publish disc again.
Why does ink adhere to the recording surface on my Epson PP-100AP?
If the ink adheres to the recording surface of your Epson Printer, keep the printed surface of the disc away from other discs until the ink on the printed disc is completely dry.
Why all lights are off on my Epson PP-100AP Printer?
If all lights are off on your Epson Printer, press the power button to ensure the product is turned on.
What to do if my Epson PP-100AP disc does not feed?
If discs are not feeding from the input stacker of your Epson Printer, follow these steps: 1. Open the disc cover. 2. Remove the blank discs from the stacker. 3. Fan the stack of discs to prevent sticking. 4. Re-insert the discs into the stacker. 5. Close the disc cover. 6. Publish the disc again.
How to fix incorrect characters on Epson PP-100AP Printer?
If your Epson Printer produces incorrect or garbled characters, uninstall the printer driver and then reinstall it.
What to do if my Epson Printer says ink is low?
If your Epson Printer displays the 'Ink low' message, you should obtain a replacement ink cartridge. To identify which cartridge is low, check the ink cartridge status.
What to do if my Epson PP-100AP Printer says stacker 1 is empty?
If the Epson Printer displays 'Stacker 1 is empty', load discs into stacker 1. The stacker lamp flashes when the source stacker is out of discs; however, the timing of the light flashing may not match the timing of the stacker becoming empty.
What to do if my Epson PP-100AP Printer says stacker 2 is empty?
If the Epson Printer displays 'Stacker 2 is empty', load discs into stacker 2. The stacker lamp flashes when the source stacker is out of discs; however, the timing of the light flashing may not match with the timing of the stacker becoming empty.
What to do if my Epson Printer says stacker 1 is overloaded?
If the Epson Printer displays 'Stacker 1 is overloaded', remove discs so that discs are below the red line.
General| Print Resolution | Up to 5760 x 1440 dpi |
|---|---|
| Connectivity | USB 2.0 |
| Ink Type | Dye-based ink |
| Number of Ink Colors | 6 |
| Paper Sizes Supported | CD/DVD |
| Display | LCD |
| Ink Cartridges | Individual cartridges |
| Disc Capacity | 1 disc |
| Supported Media | CD, DVD |
