26
❏ General
Setting Item Explanation
Monitoring Folder Specify a folder to be monitored by TD Bridge. (when a JDF file is moved into this
folder, TD Bridge starts disc publishing operation.)
When you want to change the default monitoring folder, click [Browse] to select
a desired folder on the local computer.
TD Bridge Startup Type Specify the TD Bridge startup type. The following types are available:
Manual :
The user starts TD Bridge manually.
Automatic (when logging on) :
TD Bridge starts up automatically at the user's login to Windows.
Automatic (when starting PC/service) :
TD Bridge starts up automatically at computer startup.
When this is set, the pop-up message is not displayed.
TD Bridge is run under a local system account. When specifying a file on the
network drive, change the logon account of EPSON TD Bridge Control Service
to that of the user who can access to the network drive. Otherwise, the job
may be rejected.
Start Total Disc Monitor minimized This allows you to select whether to minimize the EPSON Total Disc Monitor
window that is displayed when a job is issued.
Tick the checkbox for this option to run EPSON Total Disc Monitor with its
window minimized.
Default output device When you connecting multiple Discproducer duplicators, this allows you to
specify the default one.
If a Discproducer other than the default one is specified by the JDF file, the JDF
setting is given priority over the TD Bridge setting.
Default output stacker in standard mode This allows you to specify the default stacker to be used for stacking ejected discs
when the Discproducer is used in the standard mode.
For PP-100II/PP-100/PP-100N/PP-100AP:
"Stacker 2" or "Stacker 3 or Stacker 4" can be specified for the output stacker.
For PP-50BD/PP-7050BD:
"Stacker 2" or "Stacker 3" can be specified for the output stacker.
Print Setting Label Type Select label type from the following three options; “CD/DVD Label”, “CD/DVD
Premium Label”, and “EPSON Specified CD/DVD Label”.
To Next Page
Loading...
