Epson PP-100II Technical Reference Guide

7
Chapter 1 TD Bridge Overview
1
TD Bridge
Total Disc Maker
STF
Write
data
Print
data
Your Cooperative Application
In the same computer
Monitoring
Folder
Updated every
5 seconds
Disc image
data
Discproducer
PRN
Prepare
Set data
Preprocessing
Starts writing
End
Check during
operation
TD Bridge
Total Disc Maker
STF
JDF RJD
Write
data
Print
data
Your Cooperative Application
In the same computer
Monitoring
Folder
Preprocessing
JDF — RJD
Job information
is written
Disc image
data
INP
Start writing
RJD — INP
Discproducer
PRN
>
>
This is to check if there are discrepancies in the job information,
and to create the image data of the disc and send it to the server
(*1). Once creating and sending the image file (*1) is completed,
its RJD (Received Job Description) file is changed to the INP (IN
Progress) file.
(1) TD Bridge keeps monitoring the folder to monitor.
(2) When a JDF file is found in the folder, preprocessing is started.
(3) The JDF file is read and preprocessing is started.
At this process, the JDF file is changed to RJD (Received Job
Description) file.
(4) The RJD file is changed to the INP file.
*1 PP-100N only.
After the printer gets ready, writing and printing starts.
The job information is written to a STF
(Status File) file.
Preprocessing Start writing/printing
TD Bridge
Total Disc Maker
STF
INP
Your Cooperative Application
In the same computer
Monitoring Folder
Updated every
5 seconds
Disc image
data
Check
as necessary
Discproducer
PRN
TD Bridge
Total Disc Maker
STF
INP DON
Your Cooperative Application
In the same computer
Monitoring Folder
Job information
is updated
Disc image
data
Check
as necessary
Completed
INP — DON
Completed Disc
>
Log folder
Discproducer
PRN
Prepare
Set data
Preprocessing
Starts writing
End
Check during
operation
When the disc is published and the job is finished, its INP file
is changed to the DON (DONe) file within five seconds. DON
file moves to a log folder after one or two hours.
The STF file is updated every five seconds.
The cooperative application checks the STF file as
necessary.
Check during the operation Completion of the job

Epson PP-100II Specifications

General

Model	PP-100II
Category	Disc Duplicator
Disc Capacity	100 discs
Print Technology	Inkjet
Print Resolution	1440 x 720 dpi
Interface	USB 2.0
Weight	24 kg
Number of Drives	1
Dimensions	377‎ x 493 x 348 mm (Width x Depth x Height)
Writing Speed	CD: up to 40x, DVD: up to 12x
Operating System Compatibility	Windows XP, Vista, 7
Supported Disc Formats	CD-R, DVD-R, DVD+R