80
*1 These keys are not written on the lists when the JDF file was not accepted or when publishing has not been completed.
*2 "0" indicates that the ink cartridge needs to be replaced.
*3 When the user cancel a job, "4" is set even if no disc is published yet.
*4 When an error occurs, "5" is set even when discs are already published and the COMPLETION_NUMBER is more than 1.
*5 The content of a warning can be checked in Total Disc Monitor.
*6 For the details on plug-ins, see "Total Disc Maker Plug-in Technical Reference Guide".
PUBLISHER[N] DRIVE1_PROGRESS The progress status (%) of the drive 1 of
the device is output.
Writing, verifying write, or measuring the
error rate: "0" to "100"
(Separate progress status is output.)
Other than writing, verifying write, or
measuring the error rate: "0"
Unknown: "-1"
When the operation
progress status of
the drive 1 is
changed
DRIVE2_PROGRESS The progress status (%) of the drive 2 of
the device is output.
Writing, verifying write, or measuring the
error rate: "0" to "100"
(Separate progress status is output.)
Other than writing, verifying write, or
measuring the error rate: "0"
Unknown: "-1"
When the operation
progress status of
the drive 2 is
changed
COMPLETE_DISC_COP
IES
The total number of published discs is
output.
Number of the discs published
Unknown: "-1"
When the disc is
ejected
USB_CONNECTION_M
ODE
The connection mode of the USB cable
connecting the host computer and the
relevant device together is output.
This item is output in PP-100II only.
USB3.0: "1"
Other than USB3.0: "0"
When the device is
connected
TDB_INFO TDB_ID A unique value identifying the currently
used TD bridge is output.
TD Bridge identifier No change
VERSION The TB Bridge version will is output. TB Bridge version No change
Section name Key name Explanation
Output values that indicate
status
Change
timing
To Next Page
Loading...
