Epson RC700 - Page 283

Maintenance 9. Troubleshooting
RC700 / RC700-A Rev.23 271
No. Message Remedy Note 1 Note 2
6577
Vision process Invalid Geom property
ScaleTargetPriority value (-11528)
Set a value in the valid range.
6578
Vision process Invalid Geom property
SearchReducedImage value (-11529)
Set a value in the valid range.
6586
Vision process Invalid Geom Model
property DetailLevel value (-11602)
Set a value in the valid range.
6587
Vision process Invalid Geom Model
property Smoothness value (-11603)
Set a value in the valid range.
6603
Vision process Invalid Corr property
Accept value (-12004)
Set a value in the valid range.
6604
Vision process Invalid Corr property
NumberToFind value (-12005)
Set a value in the valid range.
6605
Vision process Invalid Corr property
AngleEnable value (-12006)
Set a value in the valid range.
6606
Vision process Invalid Corr property
AngleRange value (-12007)
Set a value in the valid range.
6607
Vision process Invalid Corr property
AngleStart value (-12008)
Set a value in the valid range.
6608
Vision process Invalid Corr property
AngleAccuracy value (-12009)
Set a value in the valid range.
6609
Vision process Invalid Corr property
Confusion value (-12010)
Set a value in the valid range.
6610
Vision process Invalid Corr property
ModelOrgAutoCenter value (-12011)
Set a value in the valid range.
6613
Vision process Invalid Corr property
RejectOnEdge value (-12014)
Set a value in the valid range.
6614
Vision process Invalid Corr property
Timeout value (-12015)
Set a value in the valid range.
6615
Vision process Invalid Corr property
RejectByArea value (-12016)
Set a value in the valid range.
6630
Vision process Invalid Edge property
structure size (-12501)
Set a value in the valid range.
6631
Vision process Invalid Edge result header
structure size (-12502)
Set a value in the valid range.
6632
Vision process Invalid Edge result item
structure size (-12503)
Set a value in the valid range.
6633
Vision process Invalid Edge property
EdgeType value (-12504)
Set a value in the valid range.
6634
Vision process Invalid Edge property
NumberToFind value (-12505)
Set a value in the valid range.
6635
Vision process Invalid Edge property
Polarity value (-12506)
Set a value in the valid range.
6636
Vision process Invalid Edge property
SearchWidth value (-12507)
Set a value in the valid range.
6637
Vision process Invalid Edge property
Accept value (-12508)
Set a value in the valid range.
6638
Vision process Invalid Edge property
ScoreWeightContrast value (-12509)
Set a value in the valid range.
6639
Vision process Invalid Edge property
ContrastTarget value (-12510)
Set a value in the valid range.
6640
Vision process Invalid Edge property
ContrastVariation value (-12511)
Set a value in the valid range.
6641
Vision process Invalid Edge property
StrengthTarget value (-12512)
Set a value in the valid range.
6642
Vision process Invalid Edge property
StrengthVariation value (12513)
Set a value in the valid range.