Epson RC700 - Page 282

Maintenance 9. Troubleshooting
270 RC700 / RC700-A Rev.23
No. Message Remedy Note 1 Note 2
6535
Vision process Invalid Blob property
Polarity value(-11006)
Set a value in the valid range.
6536
Vision process Invalid Blob property
NumberToFind value (-11007)
Set a value in the valid range.
6537
Vision process Invalid Blob property
MinArea value (-11008)
Set a value in the valid range.
6538
Vision process Invalid Blob property
MaxArea value (-11009)
Set a value in the valid range.
6539
Vision process Invalid Blob property
RejectOnEdge value (-11010)
Set a value in the valid range.
6540
Vision process Invalid Blob property
SizeToFind value (-11011)
Set a value in the valid range.
6553
Vision process Invalid Geom property
Accept value (-11504)
Set a value in the valid range.
6554
Vision process Invalid Geom property
NumberToFind value (-11505)
Set a value in the valid range.
6555
Vision process Invalid Geom property
AngleEnable value (-11506)
Set a value in the valid range.
6556
Vision process Invalid Geom property
AngleRange value (-11507)
Set a value in the valid range.
6557
Vision process Invalid Geom property
AngleStart value (-11508)
Set a value in the valid range.
6558
Vision process Invalid Geom property
ScaleEnable value (-11509)
Set a value in the valid range.
6559
Vision process Invalid Geom property
ScaleFactorMax value (-11510)
Set a value in the valid range.
6560
Vision process Invalid Geom property
ScaleFactorMin value (-11511)
Set a value in the valid range.
6561
Vision process Invalid Geom property
ScaleTarget value (-11512)
Set a value in the valid range.
6562
Vision process Invalid Geom property
SeparationMinX value (-11513)
Set a value in the valid range.
6563
Vision process Invalid Geom property
SeparationMinY value (-11514)
Set a value in the valid range.
6564
Vision process Invalid Geom property
SeparationAngle value (-11515)
Set a value in the valid range.
6565
Vision process Invalid Geom property
SeparationScale value (-11516)
Set a value in the valid range.
6566
Vision process Invalid Geom property
Confusion value(-11517)
Set a value in the valid range.
6567
Vision process Invalid Geom property
ModelOrgAutoCenter value (-11518)
Set a value in the valid range.
6570
Vision process Invalid Geom property
DetailLevel value (-11521)
Set a value in the valid range.
6571
Vision process Invalid Geom property
Smoothness value (-11522)
Set a value in the valid range.
6572
Vision process Invalid Geom property
RejectOnEdge value (-11523)
Set a value in the valid range.
6573
Vision process Invalid Geom property
SharedEdges value (-11524)
Set a value in the valid range.
6574
Vision process Invalid Geom property
Timeout value (-11525)
Set a value in the valid range.
6575
Vision process Invalid Geom property
RejectByArea value (-11526)
Set a value in the valid range.
6576
Vision process Invalid Geom property
SearchReversed value (-11527)
Set a value in the valid range.