B
While pressing the levers on both sides of the
connector, pull the connector toward you to
remove it, and place the connector on the rear
surface of the ink cartridge cover.
c
Important:
Do not leave the connector removed from the
ink cartridge for more than 30 minutes.
Otherwise, the ink will dry out and the printer
may not function as expected.
C
Remove the used ink cartridge from the ink
supply unit.
D
Open and hold the handle holes of shaken ink
cartridge and place the ink cartridge such that the
ink supply hole faces the connector.
❏ When using 10 L ink cartridge
SC-F10000 Series User's Guide
Maintenance
121
To Next Page
Loading...
Need help?
General