Epson SC-F10000 Series User Manual

Specifications Table
Printer Specifications
Printing method On-demand ink jet
Nozzle configuration 400 nozzles x 2 rows x 4 chips x 4
colors (High Density Black,
Cyan, Magenta, Yellow)
Resolution (maximum) 1200 × 1200 dpi (With 300 × 300
dpi 16 Half Tone layers.)
Control code ESC/P raster (undisclosed
command)
Media Feed Method Friction feed
Rated voltage
(#1, #2)
AC 200 to 240 V
Rated frequency (#1,
#2)
50/60 Hz
Rated current (#1, #2) 16 A
Power consumption
(total for numbers #1
and #2)
Printing: Approx. 3.9 kW
Sleep mode: Approx. 221 W
Power off: Approx. 9.6 W
Temperature and humidity (without condensation)
Printing 10 to 35 ˚C, 20 to 80%
Recommended: 18 to 28 ˚C, 40
to 60%
In storage
(Before unpacking)
-20 to 60 ˚C, 5 to 85%
(Within 120 hours at 60 ˚C,
within a month at 40 ˚C)
In storage
(Before charging
ink)
-20 to 40 ˚C, 5 to 85%
(Within a month at 40 ˚C)
In storage
(After charging ink)
5 to 35 ˚C, 5 to 85%
Printer Specifications
Temperature and humidity range
Gray area: While operating
Cross-hatch line area: Recommended
Dimension Printer
When stored: 3710 (W) x 1303
(D) x 1886 (H) mm
When at maximum size: 3710
(W) × 1350 (D) × 1931 (H) mm
Take Up Media Holder: 280 (W)
× 236 (D) × 352 (H) mm
Take In Media Holder: 280 (W) ×
285 (D) × 352 (H) mm
Ink supply unit
877 (W) × 556 (D) × 541 (H) mm
(ink supply unit only)
877 (W) × 556 (D) × 580 (H) mm
(when 3 L ink cartridge is
installed)
877 (W) × 556 (D) × 790 (H) mm
(when 10 L ink cartridge is
installed)
Weight
*
Printer
Total weight: Approx. 683 kg
Take Up Media Holder: Approx.
7 kg
Take In Media Holder: Approx. 7
kg
Ink supply unit: Approx. 53 kg
* Ink not included.
SC-F10000 Series User's Guide
Appendix
207

Epson SC-F10000 Series Specifications

General

Brand	Epson
Model	SC-F10000 Series
Category	Printer
Language	English