Epson SC-F10000 Series User Manual

F Levelers
When installing, check the level gauge, use the levelers to adjust the printer to be level, and then fix the printer in
place. Install metallic plates on the bottom to distribute the load.
Keep the printer level after moving it.
U “Moving and Transporting the Printer” on page 179
G Level gauge
Check the horizontal level of the printer.
H Circuit breaker
If an electric current caused by a short circuit is detected, the circuit is automatically cut off to prevent electric
shock. Always keep the breaker switch ON while using the printer. Check the circuit breaker's performance about
once a month.
U “Checking the circuit breaker’s performance” on page 137
SC-F10000 Series User's Guide
Introduction
13

Epson SC-F10000 Series Specifications

General

Brand	Epson
Model	SC-F10000 Series
Category	Printer
Language	English