Epson SC-F10000 Series - Page 138

B
Press the Trip button of a circuit breaker with a
fine-tipped tool such as a ball-point pen.
The breaker is working properly if the breaker
switch moves to an intermediate position
between ON and OFF.
C
If the breaker has worked properly, turn OFF the
breaker switch once and turn it back ON.
D
Press the Test button.
The breaker is working properly if an electric
leakage check button protrudes and the breaker
switch moves to an intermediate position
between ON and OFF.
E
If the breaker has worked properly, turn OFF the
breaker switch once and turn it back ON.
F
Repeat Steps 2 to 5 to check the performance of
the other circuit breaker.
If any abnormality is found, contact your local
dealer or Epson service call center.
SC-F10000 Series User's Guide
Maintenance
138