button: Rewinds the media.
button: Feeds the media.
When the
button is used to rewind, the media will stop when its edge reaches the print start position.
Rewind can be resumed by releasing the button and then pressing it again.
• Lever is raised
The loaded media is rotated in the following directions.
button: For printable side out, the rewind direction; for printable side in, the feed direction
button: For printable side out, the feed direction; for printable side in, rewind direction
If you take up media with the lever raised, it may rotate in the feed direction.
U “Loading media” on page 67
You can also do the same operation with the Auto Take-up Reel Unit's media feed switch. Operate whichever is the
easiest to use in your situation.
D button (Home button)
Press this while it is lit when the settings menu, or other such screens, is displayed to return to the Home screen.
If the Home button cannot be used during operation, the lamp turns off.
E Display
This is a touch panel that displays the printer's status, menus, and error messages. You can use your fingers to
lightly press and select menu items and options shown on the screen, or to move your finger while still touching the
screen to scroll the screen.
U “Understanding and Operating the Display” on page 20
SC-F10000 Series User's Guide
Introduction
19
To Next Page
Loading...
Need help?
General