Messages What to do
Press # and perform Head Maintenance. This message is displayed when regular cleaning has not been performed within
the set schedule. If you continue to use the printer without performing regular
cleaning, ink drops, nozzle clogging, or print head damage may occur in the
printer.
U “Cleaning” on page 103
When a Maintenance Call/Service Call Occurs
Error messages What to do
Maintenance Request
Replace Part Now/Replace Part Soon
XXXXXXXX
A part used in the printer is nearing the end of its service life.
Contact your dealer or Epson Support and tell them the maintenance request
code.
You cannot clear the maintenance request until the part is replaced. A service call
occurs if you continue to use the printer.
Call For Service
XXXX Error XXXX
Power off and then on. If this doesn't work,
note the code and call for service.
A call for service occurs when:
❏ The power cable is not connected securely
❏ An error that cannot be cleared occurs
When a call for service has occurred, the printer automatically stops printing. Turn
off the printer, disconnect the power cable from the outlet and from the AC inlet
on the printer, and then reconnect. Turn on the printer again multiple times.
If the same call for service is displayed on the LCD panel, contact your dealer or
EpsonSupport for assistance. Tell them the call for service code is "XXXX".
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Problem Solver
159
To Next Page
Loading...
Need help?
General