Epson SC-S70600 Series User Manual

E
To prevent the media from sliding off the roll,
support the roll at its right end.
F
Loosen the right roll core holder fixing screw and
remove the roll core holder from the roll.
G
Lower the roll onto the roll support.
Using the Optional Heavy Roll Auto
Take-up Reel Unit
This section explains how to remove media from the
take-up reel using a lifter.
The following types of lifter can be used.
❏ Fork or platform thickness: 28 mm or less
❏ Fork or platform can be lowered to approx. 190 mm
from the floor.
!
Caution:
❏ Because the media is heavy, it should not be
carried by one person.
The use of a lifter is recommended when
handling media that weigh 40 kg or more.
❏ Follow the instructions in the manual when
removing media or take-up roll.
Dropping media or take-up rolls could result
in injury.
A
Cut the media and roll the cut end onto the
take-up reel.
U “Cutting Media” on page 64
B
Insert the lifter between the media and the auto
take-up reel unit and adjust the height to support
the take-up roll.
C
Loosen the left roll core holder fixing screw and
remove the roll core holder from the roll.
D
Loosen the right roll core holder fixing screw and
remove the roll core holder from the roll.
Before Printing
To maintain print quality, perform the following
inspection before starting work each day.
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Basic Operations
82

Epson SC-S70600 Series Specifications

General

Brand	Epson
Model	SC-S70600 Series
Category	Printer
Language	English