Single sheets do not feed properly from the paper feeder.
Too many sheets are loaded in the paper feeder. Remove the
paper from the paper feeder and reload up to
100
sheets.
The paper is too thick or too thin to be fed. Make sure that the
paper you are using meets the specifications. Some paper types
require manual feeding. See “Technical Specifications” in the
Appendix.
The printer loads more than one sheet at a time.
-
The paper is too thin. Make sure that the paper you are using
meets the specifications. Some paper types require manual
feeding. See “Technical Specifications” in the Appendix.
The ejected paper is wrinkled.
The paper is too thin or is damp. Make sure that the paper you
are using meets the specifications. See “Technical
Specifications” in the Appendix. Do not store your paper in a
damp or humid environment.
The paper does not fully eject.
Use the
LOAD/EJECT
button to eject the page.
The paper may be too long to be loaded from the manual feed
slot. Use paper that is within the specified size. See “Technical
Specifications” in the Appendix.
Paper is loaded crookedly from the manual feed slot.
Use the
LOAD/EJECT
button to eject the page. Then insert a
new sheet straight into the manual feed slot.
3-12
Maintenance and Troubleshooting
To Next Page
Loading...
