Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 1) 103
4.3.3.8 HOUSING, LEFT
1. Remove the HOUSING, REAR, ASSY. (p96)
2. Remove the HOUSING, FRONT, LEFT. (p98)
3. Hold the front part of the HOUSING, LEFT and slightly lift it to release the tabs
(A, B) on the upper part of the Housing and the hook (C) in the Housing as shown
in Figure 4-14, and remove the HOUSING, LEFT.
Figure 4-14. Removing the HOUSING, LEFT
C A U T I O N
Do not remove or install the HOUSING, LEFT roughly, or the
hooks and the tabs on the HOUSING, LEFT may be damaged or
broken.
Be sure to engage the lower hook (C) with the tab on the main unit
first, then engage the tabs (A, B) pulling the upper part of the
HOUSING, LEFT upward.
A
B
C
HOUSING, LEFT
Inside the HOUSING
To Next Page
Loading...
