Epson Stylus Pro 3800 - Page 104

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 1) 104
4.3.3.9 HOUSING, RIGHT
1. Remove the HOUSING, REAR, ASSY. (p96)
2. Remove the HOUSING, FRONT, RIGHT. (p99)
3. Hold the front part of the HOUSING, RIGHT and slightly lift it to release the tabs
(A, B) on the upper part of the Housing and the hook (C) in the Housing as shown
in Figure 4-15, and remove the HOUSING, RIGHT.
Figure 4-15. Removing the HOUSING, RIGHT
C A U T I O N
Do not remove or install the HOUSING, RIGHT roughly, or the
hooks and the tabs on the HOUSING, RIGHT may be damaged or
broken.
Be sure to engage the lower hook (C) with the tab on the main unit
first, then engage the tabs (A, B) pulling the upper part of the
HOUSING, RIGHT upward.
B
C
HOUSING, RIGHT
Inside the HOUSING
A