Epson Stylus Pro 3800 - Page 106

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 1) 106
4.3.3.11 OPERATION, PANEL, ASSY.
1. Remove the HOUSING, REAR, ASSY. (p96)
2. Remove the HOUSING, FRONT, RIGHT. (p99)
3. Remove the HOUSING, RIGHT. (p104)
4. Release the FFC from the OPERATION, PANEL, ASSY. See Figure 4-17.
5. Remove the screw that secures the OPERATION, PANEL, ASSY. to the main
unit. See Figure 4-17.
 One C.B.S. 3 x 6 screw (9 ± 1 kgf.cm)
6. Release the hook that secures the OPERATION, PANEL, ASSY. and remove it.
See Figure 4-18.
Figure 4-17. Removing the OPERATION, PANEL, ASSY. (1)
Figure 4-18. Removing the OPERATION, PANEL, ASSY. (2)
Be sure to insert the two ribs on the OPERATION, PANEL, ASSY.
into the positioning holes on the main unit.
FFC
Connector
OPERATION, PANEL, ASSY.
C.B.S. 3x6
hook