Epson Stylus Pro 3800 - Page 123

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 1) 123
4.3.5.3 MOTOR ASSY., CR
1. Remove the HOUSING, UPPER. (p107)
2. Unlock the CARRIAGE, ASSY. and move it to the center. (p92)
3. Push the HOLDER, PULLEY, DRIVEN in the direction of the arrow to reduce the tension of the BELT, CR, and remove the BELT, CR from the Pinion Gear of the MOTOR
ASSY., CR.
Figure 4-43. Removing the BELT, CR
BELT, CR
Direction to reduce the tension
HOLDER, PULLEY, DRIVEN
BELT, CR
Pinion Gear of the
MOTOR ASSY., CR