Epson Stylus Pro 3800 - Page 157

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 1) 157
11. Slide the FRAME, HOLDER, IC, ASSY. to the right side and disengage the four
tabs, then avoiding the screw mounting tab on the left side from contacting with
the main frame, remove the FRAME, HOLDER, IC, ASSY.
Figure 4-84. Removing the FRAME, HOLDER, IC, ASSY.
 Install the FRAME, HOLDER, IC, ASSY. so that its screw
mounting tab is put over the FRAME, TOP, ASSY.
 Check that the tabs of the FRAME, HOLDER, IC, ASSY. are
securely engaged to the FRAME, TOP, ASSY.
screw mounting tab
tabs
FRAME, TOP, ASSY.
FRAME, HOLDER, IC, ASSY.
tabs
screw mounting tab